Manage Cisco 2950 Switch by IP Address

the Cisco Catalyst 2950 isn't designed for remote administration. Basic configuration to modify remote administration on the Cisco Catalyst 2950 includes configuring associate science address on the switch and conjointly sanctioning telnet access. Once these configurations square measure completed, the Cisco Catalyst 2950 Switches will be managed by science address.

What you need to manage cisco 2950 switches by ip address:

Cisco serial console cable
Windows XP pc connected to the native network
Privileged EXEC secret for the Cisco Catalyst 2950

IP address, subnet mask and entranceway information science address for the switch

How to manage Switch 2950 series by ip address:

1. Connect the Cisco serial console cable into the console port on the Cisco Catalyst 2950 switch and connect the opposite finish of the cable into the 9-pin port, that is typically settled on the rear or facet of the Windows XP pc.

2. Click the “Start” button and choose the “Run” box and sort “hypertrm” and press the “Enter” key and also the HyperTerminal program can seem. type A name for the session, like “Cisco 2950″ within the “Name:” field and click on the “OK” button. Click the “Connect using:” menu, then click the “Com port” accustomed connect the Windows XP pc to the Cisco 2950 switch. Press the “Enter” key. Then click the “Bits per second:” menu and choose “9600.” Click “None” within the “Flow Control” menu and press the “Enter” key.

3. Press the “Enter” key and also the Cisco electronic communication can seem. kind “enable” and press “Enter.” Then enter the secret if requested.

4. kind “config term” and press the “Enter” key to enter “Configuration Mode” on the switch.

5. kind “line vty zero 4″ and press the “Enter” key. kind “password abcd,” exchange “abcd” with the secret you want to use to secure telnet access. Press the “Enter” key. Then kind “login” and so press the “Enter” key.

6. kind “interface Vlan1″ and press the “Enter” key. Then kind “ip address ten.0.0.1 255.0.0.0,” exchange the “10.0.0.1 255.0.0.0″ with the IP address and subnet mask allotted to the switch. Press the “Enter” key.

7. kind “exit” and press the “Enter” key. Then kind “ip default-gateway x.x.x.x,” exchange “x.x.x.x” with the entry IP address for the switch. Press the “Enter” key. Then kind “end” and press the “Enter” key. kind “copy run start” and press the “Enter” key to save lots of the configuration. kind “exit” and press the “Enter” key.


8. Click “Start” on the Windows XP pc. Click “Run” and so kind “cmd” and press the “Enter” key. kind “telnet x.x.x.x” on the command, exchange “x.x.x.x” with the IP address simply designed on the Cisco Catalyst 2950. Press the “Enter” key. kind the telnet secret simply programmed into the Cisco Catalyst 2950 once requested. Press the “Enter” key and also the Cisco electronic communication ought to show thus you'll currently manage the turn the network.